About Unit Converter
Unit conversion is unavoidable across engineering, trade and daily life — a US blueprint in inches must become millimeters for a domestic shop; a baking recipe in cups must match a metric jug. A logistics quote in miles must reconcile with a navigation app in kilometers. This tool gathers length, weight, area, volume, speed and data-storage units in one place, covering both metric and imperial systems. Type on either side and the other updates instantly, with the ratio and formula shown. Everything runs locally in your browser, so it works offline. For example, 1 mile converts to 1.609 km, or 500 ml to 2.11 cups — metric and imperial instantly interchangeable. Conversion splits into proportional and affine, and confusing them yields plausible but entirely wrong results. Proportional conversion multiplies by a factor and is freely reversible; affine conversion also adds an offset, and dropping it looks fine near zero while going badly wrong at extremes. Decide first whether the two units share a zero before deciding if an offset is needed. Longer conversion chains accumulate error, the main precision risk. Pounds to euros to yen introduces one rounding per step, and the drift becomes visible on larger amounts. Prefer one step, or normalise everything to a base unit and distribute outwards so each step is a single operation and intermediate values stay checkable. Beware units with the same name but different definitions. Gallons differ between US and imperial, ounces between avoirdupois and troy, tons between metric and short, and historically one country has used more than one system. State the system in APIs and documentation rather than the unit name alone, and treat the system as part of the field when exchanging data internationally. A converter suits daily use better than formulas, provided you know which quantity is being converted. The same metre means different things as a length and as an altitude reference, and the same degree differs between angle and temperature. Confirm the quantity type before applying the conversion, which prevents using the right factor on the wrong thing. Finally, significant digits in the output should match the input rather than being padded. Six digits from a two-digit input suggests false precision, while two digits from a high-precision measurement discards information worth keeping. Matching output precision to input precision is basic numeric practice and makes a result look more, not less, credible. One more premise: a converter is only as precise as the factors it carries, and common unit factors are approximations. High-precision engineering work should use exact conversion factors from an authoritative source and implement them directly rather than relying on a general tool; these suit everyday and documentation use, not metering or settlement where precision is contractual.
How It Works Internally
Unit conversion splits into two kinds: proportional conversion multiplies by a factor (length, mass, currency) and affine conversion also adds an offset (temperature, some pressure references). The first is freely reversible; the second looks right near zero and goes badly wrong at extremes if the offset is dropped. Errors accumulate along a conversion chain, so one step is best.
1 mile1609.344 metres (proportional, factor only; every extra step in a chain adds rounding error)Measured on This Page
| km→mi | 1 km = 0.621371192237 mi — 12 significant digits |
|---|---|
| mi→km | 1 mi = 1.609344 km (reverse direction, consistent both ways) |
| Factors | mile=1609.344 m, foot=0.3048, inch=0.0254, yard=0.9144, nautical mile=1852 — all exact international definitions |
| Two-way input | Editing either side recomputes the other |
| Formatting | Very large/small values switch to scientific notation (thresholds 1e15 / 1e-9) |
The mile is exactly 1609.344 metres by the 1959 international agreement — not approximately — so 1 km = 0.621371192237… is a non-terminating decimal and the displayed digits come from the 12-significant-digit formatter. Temperature is intentionally out of scope: °C/°F conversions carry an offset and cannot be expressed as pure multiplication factors, which is a common bug source when mixed into factor tables. Pick the category first, then units — switching categories resets the values.
How to Use
- Open "Unit Converter"
- Pick a category such as length or weight
- Enter a value and choose from and to units
- The result and ratio update instantly
- Use the swap arrow to reverse direction
Use Cases
- Blueprint cross-check — Convert imperial dimensions (inch, foot) to metric millimeters or meters to avoid CAD-to-shop mismatch.
- Recipe scaling — Switch between cups, milliliters and pints so American recipes fit a metric kitchen with precise ratios.
- Logistics mileage — Convert miles to kilometers or nautical miles to reconcile cross-border transport distance and quoting.
- Land area — Convert acres, hectares and square meters for overseas property and farmland comparison.
- Storage sizing — Switch between bytes, KB, MB, GB, TB, PB to gauge real disk and cloud capacity.
- Unit-test values — Convert test expectations between metric and imperial to verify the result of a unit-conversion function.
- Pressure and torque — Convert between psi, bar, Pa and N·m for mechanical engineering specs and tool calibration.
FAQ
Is the accuracy reliable?
We use internationally standard conversion factors (e.g. 1 inch = 0.0254 m) with high-precision floating-point math, keeping 12 significant digits before rounding — accurate enough for common use.
Does it support temperature?
Not here, because Celsius/Fahrenheit/Kelvin are not linear ratio conversions. Use our Temperature Converter for that.
Why 1024 instead of 1000 for data?
We use binary prefixes (1 KB = 1024 B) to match how operating systems report size; for decimal prefixes (1 KB = 1000 B) convert manually.
Can I type on either side?
Yes. Edit either input and the other recomputes instantly — no need to swap direction.
Does it work offline?
Yes. All logic runs locally in your browser; once loaded it works without a network and uploads nothing.
What can be converted, and why do some results look wrong?
Common physical quantities are covered (length, weight, temperature, area, volume, speed). Discrepancies usually come from unit confusion: US vs imperial gallons differ by 20%, miles vs nautical miles are different, and "pound" means mass or pound-force. Check the full unit name, not the abbreviation.
Are "kilogram" and "kg" different units? Why are both listed?
They are the same unit (kilogram) under different aliases; the tool keeps aliases so your input matches. Results are unaffected — same for metre/meter. As long as the dimension matches, aliases are just entry points.
The conversion has too many decimal places — how many should I keep?
Precision should match your input and purpose: integer input does not need 8 decimals, engineering dims round to millimetres, chemistry keeps 4 significant figures. The tool gives full precision and rounding is a business decision — rounding early and reusing the value amplifies error.